Full details and instructions:
Application area: New car or furniture leather upholstery.
Soiled leather should be thoroughly cleaned in advance. This prevents dirt sticking to the leather when applying COLOURLOCK Leather Shield. Our COLOURLOCK Leather Cleaning Brush effectively removes ingrained dirt (use circular motion in all directions for better results).
New leather should be treated with our COLOURLOCK Leather Shield within the first three years to protect it against traces of wear and abrasion, as well as discolouration from clothing (dye transfer). The driver’s seat (entry bolsters of sports seats and high support cushions) usually begin showing typical signs of wear over the first three years. Leather Shield will prevent this. Treat the driver’s seat every three months, the rest of the leather every six to twelve months.
The amount is usually sufficient to treat a complete car interior or a whole set of furniture multiple times. The Cleaner is for soiled areas only, while the Leather Shield should be applied on all surfaces. Where there is extreme soiling, a greater amount of Cleaner might be needed. But this is very rare.
Always test any products first on a hidden area in case they affect the colour.
The Leather Cleaner comes in a foam dispenser bottle. Foams clean the leather more efficiently than liquid agents, the consumption is considerably smaller and the leather does not become wet, which could otherwise lead to hardening after drying.
The Leather Cleaner gently cleans the leather. Apply some foam on the Cleaning Sponge and proceed with cleaning. Remove dirty foam residue with a slightly moistened cloth.
The COLOURLOCK Leather Shield provides protection for heavily-strained nappa leather surfaces. The Shield prevents rapid wear and discolouration from clothing. Moisten a terry cloth slightly with Leather Shield and treat the strained areas every three months.
These products are also suitable for “Cool Leather/SRT (SunReflective Technology) Leather”!